Narex Hand Cut Cabinet Rasps
Backorder Item
This item is currently on backorder. We are accepting orders and will ship as soon as stock is replenished.
Satisfaction Guarantee
Satisfaction Guarantee
If for any reason you are not satisfied with any stock item purchased from Highland Woodworking, return it to us within 60 days of receipt (30 days for Festool tools) and we will promptly replace it or refund the purchase price of that item, according to your preference.
Click for more information.
Shipping & Delivery
Shipping & Delivery
Orders are processed soon after receipt and are usually shipped within 2 business days via FedEx ground or US Mail, depending on location and weight.
We do not ship combustible materials by air.
If we are out of stock on an item, we will either back order or cancel that item according to any special instructions entered with your order or our ability to source the product.
Visit our complete Shipping Information Page for more detailed information.
California Customers - Prop 65 Warning
California Customers - Prop 65 Warning
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, see www.P65Warnings.ca.gov.
Did you find an error on this page?
Did you find an error on this page?
We have made every effort to ensure our product pages are accurate and fully functioning. However, even we may miss something! If you see an error, please email us at feedback@highlandwoodworking.com. Include a link to the page, or the SKU number of the product, and short description of what’s wrong and we will address it. Thank you!
With a hand cut / hand stitched cabinet makers rasp, the teeth are randomized just enough in their layout so the cutting action yields a much smoother finish than you can achieve with wood rasps that have machine stamped teeth, which are often quite large, too uniform in layout and make deep trenches into the wood.
The Narex rasps with hand stitched teeth offer different sized teeth, with smaller, more closely spaced teeth punched into the blank, allowing for even smoother cutting results. Hand punched teeth can be set right up to the edge of the rasp blank, so more teeth are available for cutting and you get cutting ability right up to adjacent surfaces. Stock removal remains efficient with a hand cut rasp, yet the surface finish left by the teeth is much improved from machine made wood rasps, so sanding out rasp marks on your shaping and sculpting projects goes much more quickly.
Available in coarse, medium and fine grades of cut. The “fine” has a grade of cut that's close to the grade of cut from the old Nicholson #50 cabinetmakers rasp.
These 10 inch long rasps are 1-1/8″ wide and taper at the tip to 3/4″ wide. They come with a stained hornbeam wood handle with brass ferrule. Carbon steel hardness of 49 RC. Overall length is 15-1/2 inches.